Concrete color difference repair agent Nagqu concrete color difference repair

Concrete color difference repair agent is a special coating with excellent repair and color-matching functions. It can penetrate the concrete surface, fill in micro-cracks and imperfections, while tightly bonding with the concrete substrate to form a uniform protective film. More importantly, by adding different color pastes, the color of the repair agent can be easily adjusted to perfectly match the surrounding concrete color, achieving seamless repair.

II. Preparations Before Color Matching

1. Identify the Cause of Color Difference: Before color matching, it is essential to determine the specific reasons for the concrete color difference, such as uneven mixing ratios, poor cement quality, or insufficient curing time. This helps in selecting the most suitable repair method and type of color paste.

2. Clean the Concrete Surface: Thoroughly clean the concrete surface using a high-pressure water gun or electric brush to remove dust, oil stains, and other impurities. Ensure the surface is clean, dry, and smooth to enhance the adhesion and repair effectiveness of the repair agent.

3. Select the Appropriate Repair Agent: Based on the color of the concrete and the area to be repaired, choose the appropriate concrete color difference repair agent. At the same time, prepare the necessary mixing tools, containers, and color pastes.

III. Detailed Steps for Color Matching

1. Mix the Repair Agent: Pour the concrete color difference repair agent into a container and stir thoroughly with a mixing rod to ensure there are no lumps or sediment.

2. Add Color Paste: Select the correct color paste based on the concrete color and the extent of repair needed. Generally, start by adding the primary color, such as black or gray, and gradually incorporate auxiliary color pastes for adjustment. Be cautious with the amount of color paste added to avoid over-coloring or mismatched colors.

3. Observe Color Changes: Continuously observe the color changes of the repair agent during the addition of color paste. A small amount of repair agent can be used for a test color until it closely matches the surrounding concrete color.

4. Uniform Color Matching: Based on the test results, uniformly adjust the entire batch of repair agent in the same proportion. If adjustments to color depth or saturation are needed, add an appropriate amount of water for dilution.

IV. Construction Techniques and Precautions

1. Construction Environment: Ensure the ambient temperature and humidity are suitable during construction, avoiding extreme weather conditions. Additionally, maintain good ventilation in the construction area to reduce the emission of harmful gases.

2. Even Application: Use a sprayer or roller to apply the repair agent evenly on the concrete surface. During application, maintain consistent pressure to avoid localized areas that are too thick or too thin. Try to brush in the same direction to ensure uniform color.

3. Drying and Curing: After applying the repair agent, allow it to dry naturally. The drying time varies depending on the ambient temperature and humidity, typically ranging from a few hours to a day. Avoid touching or stepping on the repaired area during the drying period to ensure the repair agent fully cures.

4. Secondary Repair: If the color difference remains noticeable or the color does not match the surrounding area after the initial repair, a secondary repair can be performed. Adjust the mixing ratio and number of application layers based on the initial repair results until satisfactory results are achieved.